Siemens SIMATIC S7-400H Manual page 125
Automation system, fault-tolerant systems
Hide thumbs
Also See for SIMATIC S7-400H:
- System manual (504 pages) ,
- Manual (210 pages) ,
- Manual (5 pages)
Table of Contents
5. From formula [1]:
T
(DP master system_1)
P15
= 1250 ms – (2 × 25 ms + 300 ms + 50 ms + 100 ms + 30 ms) = 720 ms
T
(DP master system_2)
P15
= 1200 ms – (2 × 30 ms + 300 ms + 50 ms + 80 ms + 50 ms) = 660 ms
Check: if T
6. T
P15_HW
7. From formula [2]:
T
P15_OD
Check: if T
8. From Section 6.3.4 for 170 Kbytes user program data:
T
P15_AWP
Check: if T
9. Formula [3] now provides the recomm. max. blocking time for priority classes
> 15:
T
= MAX (194 ms, 140 ms)
P15
T
= 194 ms
P15
Entering 194 ms for the maximum blocking time for priority class > 15 in STEP 7
ensures that a signal change during the update will always be recognized when the
signal lasts 1250 ms or 1200 ms.
Remedies if it is not possible to calculate T
If no recommendation results from the calculation of the maximum blocking time
for priority classes > 15, you can remedy this by various measures:
• Reduce the watchdog interrupt cycle of the watchdog interrupt configured.
• For particularly high T
systems.
• Increase the transmission rate on DP master systems affected.
• Configure the DP/PA links and Y links in separate DP master systems.
• If the DP slaves have very different switch-over times and thus (generally) great
variations in T
systems.
• If only a small load due to interrupts or parameter assignment is to be expected
in the individual DP master systems you can also reduce the T
calculated by approx. 20–30%. This will increase the risk of a station failure
occurring in the distributed I/O.
Automation System S7-400H Fault-tolerant Systems
A5E00068197-07
> 0, continue with
P15
= MIN (720 ms, 660 ms) = 660 ms
= 50 ms + T
= 50 ms + 90 ms = 140 ms
PH
= 140 ms < T
P15_OD
= 194 ms
= 194 ms < T
P15_AWP
times, divide the slaves into several DP master
TR
, distribute these slaves among a number of DP master
PTO
Linking and Synchronizing
= 660 ms, continue with
P15_HW
= 660 ms, continue with
P15_HW
P15
times
TR
6-23
- Quick Links:
- S7-400H Installation Options
Hide quick links:
Table of Contents
