Table of Contents
3.5.2 Complexing for an Inline Configuration
The following steps are required for the joining of two stations together. The complexing
tie plates (2) are attached to one station, the second station is set in place next to the first,
the flexible spacers are inserted, and then the second station is bolted to the two tie plates.
1. Install a Wedge Tie Plate Inline, 51403124-100, to the front of the bottom corner of
one of the two stations bases. See Figure 3-4.
2. Install a Tie Plate Inline, 51308056-100, under the keyboard of the same station.
See Figure 3-4.
3. Place the second station next to the first station.
4. Insert the two long bolts to the keyboards of each station. Start a nut on each bolt.
5. Insert the Inline Wedge Assembly, 51202034-100, between the keyboards and
tighten the nuts.
Figure 3-7 — Straight-Line Complexed Operator Interface Stations with Wedges
LCN System Installation
12559
3-9
3.5.2
9/96
- Quick Links:
- Lcn Cabling Rules
- Ground Wiring Overview
Hide quick links:
Table of Contents
