BT220 Technical Information and Operation
Maintenance
6.2
Reset
6.3
Software release
6-2
Should a software reset of the BT220 be necessary (e.g. after faults of the
BT220), proceed as follows:
1. Switch off the BT220 power supply.
2. Press and hold down keys "1" and Y at the same time.
3. Switch the BT220 power supply back on.
Then you can release the keys.
To display the current software status of the BT220:
1. Press the MEN key.
2. Press the key i.
(Software status: the last 3 digits in the first display line)
3. To return to the message display mode:
Press key i then
press the MEN key.
1070 080 037-101 (99.01) GB