Table of Contents
BT220 Technical Information and Operation
Operation
5.9
Adapting the BT220 Display
5.9.1
Setting the Message Display Mode
5-24
In this section you find all internal display functions of the BT220.
' Set these functions during commissioning.
In case of several active events, the BT220 automatically shows one event
on the display. The event automatically displayed can be defined in accord-
ance with the following criteria:
Last value with priority:
Last value without priority:
First value with priority:
First value without priority:
In the following description we assume that the BT220 is in the message dis-
play mode (see chapter 5.1, page 5-2).
Procedure
1. Press the MEN key.
The menu item "Diagnostic memory" appears in the second display line.
2. Keep on pressing the B key until the text "Special function" is displayed
in the second display line.
3. Press the
4. Keep on pressing the B key until the text "System functions" is displayed
in the second display line.
5. Press the
6. The current setting is displayed behind the text "Mode".
To change the message display mode:
To cancel the function:
7. Select the required mode using the keys Y and B.
8. To activate the selected mode:
To keep the current setting:
Proceed to step 6.
the latest event with the highest priority is
displayed first (default setting)
the latest event is displayed first
the oldest event with the highest priority is
displayed first
the oldest event is displayed first.
key.
key three times.
Press the VAR key.
Press the MEN key twice.
Press the
key.
Press the MEN key.
1070 080 037-101 (99.01) GB
Chapters
Table of Contents
