Fujitsu ETERNUS DX80 Manual

This manual describes safety precautions.

For your safety and that of others, follow the guidelines provided in the following pages concerning the use of the ETERNUS DX60/

DX80.

Warning signs are shown throughout this manual in order to prevent injury to the user and/or material damage. These signs are

composed of a symbol and a message describing the recommended level of caution. The following explains the symbols, their lev-

els of caution, and their meanings as used in this manual.

This symbol indicates the possibility of serious or fatal injury if the ETERNUS DX60/DX80 is not used prop-

erly.

WARNING

This symbol indicates the possibility of minor or moderate personal injury, as well as damage to the ETER-

NUS DX60/DX80 and/or to other users and their property, if the ETERNUS DX60/DX80 is not used properly.

CAUTION

The following symbols are used to indicate the type of warnings or cautions being described.

Electrical Shock

The triangle emphasizes the urgency of the WARNING and CAUTION contents. Inside the triangle and

above it are details concerning the symbol (e.g. Electrical Shock).

No Disassembly

The barred "Do Not..." circle warns against certain actions. The action which should be avoided is both

illustrated inside the barred circle and written above it (e.g. No Disassembly).

Unplug

The black "Must Do..." disk indicates actions that must be taken. The required action is both illustrated

inside the black disk and written above it (e.g. Unplug).

If you detect an unusual occurrence

during operation

WARNING

•

If the power code and/or power plug is dam-

Do Not

aged, do not use the ETERNUS DX60/DX80

and contact your sales representative or your

maintenance engineer. Never attempt to repair

the ETERNUS DX60/DX80 by yourself, as

there is a risk of electrical shock and/or fire.

Disk storage system

Safety Precautions

•

If the ETERNUS DX60/DX80 overheats, gives

Unplug

off smoke or an unusual odor, makes an

unusual sound, or shakes abnormally, imme-

diately turn off the ETERNUS DX60/DX80 and

disconnect the power plug from the socket.

After the problem has subsided, contact your

sales representative or your maintenance

engineer. Never attempt to repair the ETER-

NUS DX60/DX80 by yourself, as there is a risk

of electrical shock and/or fire.

•

If any liquids such as water or foreign objects

like metal fragments get into the device,

immediately turn off the ETERNUS DX60/

DX80 and disconnect the power plug from the

socket. Then, contact your sales representa-

tive or your maintenance engineer. Never

attempt to disassemble the ETERNUS DX60/

DX80 by yourself, as there is a risk of electri-

cal shock and/or fire.

P3AM-3142-01EN

First Edition

June 2009