Table of Contents
5.
A confirmation dialog opens. Once started, you cannot interrupt the firmware update
process that typically takes a little less than 10 minutes and may vary depending on the
site specific factors such as network performance. If you are sure you want to start the
process, click OK button. The dialog closes, the firmware update process starts, and "Step
7: Execute Update" page automatically proceeds to the next step. Hereafter, do not stop
HVM Navigator before completion of the firmware update process.
Monitoring progress of firmware update and completion after execution
You can monitor the progress of firmware update and complete the firmware update operation
after execution according to the steps below.
1.
On "Step 8: Update Status" page, Status field shows "Run" and Step field shows the
current step while firmware update execution is in progress.
2-28
Dynamic Version Upgrade / Revision Update by HVM Navigator
Hitachi Compute Blade Logical partitioning manager Version Upgrade / Revision Update Guide
Table of Contents
