Allen-Bradley 140G Series Installation Instruction
For flex cable operator for 140g-g through k
Show thumbs
Also See for 140G Series:
- Manual (12 pages) ,
- Installation manual (10 pages) ,
- Quick start manual (8 pages)
Available languages
Available languages
Quick Links
140G-G-F____, 140G-H-F____, 140G-I-F____, 140G-J-F____, 140G-K-F____
Installation instruction for Flex Cable Operator for 140G-G through K
Istruzioni di installazione
Installationsanleitung
Instructions pour l'installation
Instrucciones de instalación
Installation - Installazione - Instalación
Instalação -
WARNING:
To prevent electrical shock, disconnect from power source before
installing or servicing. Install in suitable enclosure. Keep free from contaminants.
(Follow NFPA70E requirements).
AVVERTENZA: Per prevenire infortuni, togliere tensione prima dell'installazione o
manutenzione. Installare in custodia idonea. Tenere lontano da contaminanti.
(Seguire i requisiti NFPA70E).
WARNUNG:
Vor Installations- oder Servicearbeiten Stromversorgung zur
Vermeidung von elektrischen Unfällen trennen. Die Geräte müssen in einem
passenden Gehäuse eingebaut und gegen Verschmutzung geschützt werden. (Befolgen
Sie die Anforderungen nach NFPA70E).
Avant le montage et la mise en service, couper l'alimentation
AVERTISSEMENT:
secteur pour éviter toute décharge. Prévoir une mise en coffret ou armoire appropriée.
Protéger le produit contre les environnements agressifs. (Vous devez respecter la
norme NFPA70E).
ADVERTENCIA: Desconéctese de la corriente eléctrica, antes de la instalación o
del servicio, a fin de impedir sacudidas eléctricas. Instálelo en una caja apropiada.
Manténgalo libre de contaminantes. (Cumpla con los requisitos NFPA70E).
ATENÇÃO: Para evitar choques, desconectar da corrente elétrica antes de fazer a
instalação ou a manutenção. Instalar em caixa apropriada. Manter livre de
contaminantes. (Cumpra as exigências da norma NFPA70E).
M4 x .7 x 12 mm
M4 x .7 x 12 mm
PN-353709
DIR 10000873178 (Version 05)
-
1/4-20 x .71 in
140G-G
140G-H
140G-I
140G-J
140G-K
Bul. 140G/140MG
#6-32 x .312 in
#10-32 x .22 in
Related Manuals for Allen-Bradley 140G Series
Summary of Contents for Allen-Bradley 140G Series
- Page 1 Bul. 140G/140MG 140G-G-F____, 140G-H-F____, 140G-I-F____, 140G-J-F____, 140G-K-F____ Installation instruction for Flex Cable Operator for 140G-G through K Istruzioni di installazione Installationsanleitung Instructions pour l’installation Instrucciones de instalación Installation - Installazione - Instalación Instalação - WARNING: To prevent electrical shock, disconnect from power source before installing or servicing.
- Page 2 140G-K Shown Provided with Circuit Breakers U >0V > 1.0” (25 mm) Cable Length Diameter (Min.) 3 ft (0.9 m) 6.0”(152.4 mm) 4 ft (1.3 m) 12.0”(304.8 mm) 6 ft (1.9 m) 12.0”(304.8 mm) 10 ft (3.0 m) 12.0”(304.8 mm) PN-353709 DIR 10000873178 (Version 05)
- Page 3 140G-G 140G-H 1.378 in 0.984 in (35.0 mm) (25.0 mm) 140G-I 140G-J 4.213 in 4.803 in (107.0 mm) (122.0 mm) 1.378 in 1.181 in (35.0 mm) (30.0 mm) 10 - 15 lb-in 1.2 - 1.7 Nm 4.370 in 5.472 in (111.0 mm) (139.0 mm) 140G-K...
- Page 4 140G-K Shown T-20 10 - 15 lb-in 1.2 - 1.7 Nm 140G-M1, -P1 or -S1 PN-353709 DIR 10000873178 (Version 05)
- Page 5 140G-K Shown Enclosures with Right Hand Flange Enclosures with Left Hand Flange 7/16" (11 mm) 30 - 40 lb-in (3.5 - 4.5 Nm) 30 - 40 lb-in (3.5 - 4.5 Nm) 90° 7/16" (11 mm) 90° 140G-K Shown Enclosures with Right Hand Flange Enclosures with Left Hand Flange 7 - 11 lb-in 7 - 11 lb-in...
- Page 6 1 - Trip Breaker CLACK 2 - Reset Breaker See figure A Vedi figura A Siehe Abb. A Voir figure A Véase figura A CLACK 3 - Breaker On See figure B Vedi figura B Siehe Abb. B Voir figure B Véase figura B CLACK 4 - Breaker Off...
- Page 7 3/4" 3/4" (19 mm) (19 mm) RESET PN-353709 DIR 10000873178 (Version 05)
- Page 8 Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page. Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. PN-353709 Publication 140G-IN128F-MU-P - March 2016 DIR 10000873178 (Version 05) Copyright ©...