Table of Contents
Chapter 3
Installation
3.2
Mountable slots for EH-RMP2
The mounting position of EH-RMP2 is restricted according to CPU module. EH-RMP2 cannot be on expansion base
unit regardless of CPU module.
(1) If you use EHV-CPU16/32/64/128 in CPU module.
Maximum 8 link modules (EH-RMP2) can be on base unit. Mountable slot numbers are 0 to 7 as shown in Figure3.2-1.
Please note that EHV-CPU16/32/64/128 cannot mount on old model base unit (EH-BS3, EH-BS5, EH-BS8).
(2) If you use EHV-CPU1025/1102 in CPU module.
Maximum 8 link modules (EH-RMP2) can be on base unit. Mountable slot numbers are 0 to 7 as shown in Figure3.2-2.
Please note that EHV-CPU1025/1102 cannot mount on old model base units (EH-BS3, EH-BS5, EH-BS8).
(3) If you use EH-CPU516/548 in CPU module.
Maximum 2 link modules (EH-RMP2) can be on base unit. Mountable slot numbers are 0 to 7 as shown in
Figure3.2-3.
If base unit is old model base units (EH-BS3, EH-BS5, EH-BS8), mountable slot numbers are 0 to 2.
Slot No.
0
1
Figure 3.2-1 Mountable slots for EH-RMP2 (EHV-16/32/64/128)
Slot No.
0
1
Figure 3.2-2 Mountable slots for EH-RMP2 (EHV-CPU1025/1102)
Slot No.
0
1
Figure 3.2-3 Mountable slots for EH-RMP2 (EH-CPU516/548)
2
3
4
5
6
7
8
2
3
4
5
6
7
8
2
3
4
5
6
7
8
3 – 2
9
A
9
A
9
A
Table of Contents
