Honeywell EXCEL 5000 OPEN ZAPP Installation Instructions
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Receiver
  5. EXCEL 5000 OPEN ZAPP
  6. Installation instructions
Honeywell EXCEL 5000 OPEN ZAPP Installation Instructions

Honeywell EXCEL 5000 OPEN ZAPP Installation Instructions

Hide thumbs Also See for EXCEL 5000 OPEN ZAPP:
1
2

Quick Links

BEFORE INSTALLATION

The ZAPP receiver is capable of exchanging data with the
ZAPP handheld (RT 7070A). Up to eight ZAPP handhelds
may be used in a single system.
IMPORTANT!
ZAPP may be used only in countries where ISM
433MHz band is useable.
Further, it is recommended that devices be kept at
room temperature for at least 24 hours before
applying power to allow any condensation resulting
from low shipping/storage temperatures to
evaporate.
INSTALLATION
See Fig. 1 for outside dimensions and Fig. 2 for sub-base
mounting dimensions. The ZAPP receiver can be mounted in
any orientation desired on a panel, wall, or onto a standard
wall outlet box (see Fig. 3).
Power
Input power provided must be 24 Vac (±20%), 50 or 60 Hz.
For US installation, power must come from an energy-limited
Class II Power Source (transformers must not exceed 100
VA).
CAUTION
Electrical shock or equipment damage. Turn off
power prior to connecting to or removing connections
from any terminals.
Use the heaviest gauge wire available, up to 14 AWG
2
(2.5 mm
), with a minimum of 18 AWG (1.0 mm
power wiring.
Communications
Wire the ZAPP communications L
level IV 22 AWG or plenum-rated level IV 22 AWG non-
shielded, twisted pair, solid conductor wire.
® U.S. Registered Trademark
Copyright © 2002 Honeywell Inc.
All Rights Reserved
2
) for all
®
W
network using
ON
ORKS
INSTALLATION INSTRUCTIONS
Fig. 1. ZAPP receiver outside dimensions in inches (mm)
Fig. 2. Sub-base mounting dimensions
1
2
3
4
5
6
7
8
9
10
Fig. 3. Mounting on wall outlet box
ZAPP
RECEIVER
EN1B-0166GE51 R0502
loading

Related Manuals for Honeywell EXCEL 5000 OPEN ZAPP

Summary of Contents for Honeywell EXCEL 5000 OPEN ZAPP

  • Page 1: Before Installation

    ORKS level IV 22 AWG or plenum-rated level IV 22 AWG non- shielded, twisted pair, solid conductor wire. Fig. 3. Mounting on wall outlet box ® U.S. Registered Trademark Copyright © 2002 Honeywell Inc. All Rights Reserved EN1B-0166GE51 R0502...
  • Page 2 (see Fig. 7). Control Products Control Products Control Products Honeywell Inc. Honeywell Limited-Honeywell Limitee Honeywell AG Honeywell Plaza 155 Gordon Baker Road Böblinger Straβe 17 manufacturing location P.O. Box 524 North York, Ontario D-71101 Schönaich...