Quick Links
2. Pull up on AIRLIFT® lever and press down on desktop to lower.
FAQS
A. Yes! Be sure the desk is below it's 22 lbs. weight limit.
Q. What size is the base?
A. Base measures 18 inches wide and 19 inches deep.
Q. Do I need to plug it in?
Top dimensions: 30.7" W x 20.5" L
Tray dimensions: 29.1" W x 9.05" L
Base dimensions: 18" W x 20.5" L
Overall dimensions: 30.7" W x (20.5" to 27.2") L x (6.9" to 17.9") H
Maximum weight on tray: 5 lbs. (2 kg.)
Maximum weight overall: 22 lbs. (10 kg.)
Telephone: (800) 323-5565
Fax: (310) 533-3899
Hours: 8:30 AM – 4:30 PM (PST)
Email:
Homepage:
www.SevilleClassics.com
04-2018
AIRLIFT® 30 Compact Standing
Desk Converter Riser
Model: OFF65841
Thank you for choosing Seville Classics! We hope that you enjoy your
standing desk converter! Please read through this user guide for parts
04-2018
Related Manuals for Seville Classics AirLift 30 OFF65841
Summary of Contents for Seville Classics AirLift 30 OFF65841
- Page 1 Telephone: (800) 323-5565 Fax: (310) 533-3899 Model: OFF65841 Hours: 8:30 AM – 4:30 PM (PST) Thank you for choosing Seville Classics! We hope that you enjoy your Email: [email protected] standing desk converter! Please read through this user guide for parts Homepage: www.SevilleClassics.com...
- Page 2 Parts List Safety Failure to follow these instructions may result in property damage or personal injury. A. Desk (1) B. Tray (1) C. Left Bracket (1) D. Right Bracket (1) DO NOT place devices on DO NOT route wires desk edge. underneath desk.
- Page 3 Adjust to the ideal height for use while sitting or standing. Assembly Instructions STEP 1. Turn TRAY (B) upside down. Position LEFT BRACKET (C) over mounting holes on left side of tray. Insert ANCHOR (G) through BRACKET (C) and into TRAY (B). TIP: Make sure the mounting holes on the BRACKETS (C, D) face the inner side of the tray.
- Page 4 STEP 2. STEP 3. Squeeze AIRLIFT® lever and pull up on both sides of the desk to lift. Turn DESK (A) upside down. Align BRACKETS (C, D) to holes on bottom of desk top. Attach with LONG SCREWS (F) using HEX WRENCH (H). AIRLIFT®...