Epson L3110 Start Here

L3110

Start Here

Read these instructions before using your product.

1

Unpack

Note:

Do not open the ink bottles until you are ready to fill the ink

tanks. The ink bottles are vacuum packed to maintain reliability.

Remove all protective materials from the product.

Note:

Do not turn on the product yet.

2

Fill ink tanks

Caution:

• This product requires careful handling of ink. If ink spills, wipe it off

immediately with a damp towel to avoid permanent stains. If ink

gets on your clothes or belongings, it may not come off.

• Epson cannot guarantee the quality or reliability of non-genuine ink.

The use of non-genuine ink may cause damage that is not covered

by Epson's warranty.

Warning:

Keep the ink bottles out of the reach of children and do not

drink the ink.

1

Open the ink tank cover and the cap for the black ink

tank.

Note:

Refer to the color-coded sticker on the ink tank unit to

identify the color of each tank.

2

Unpack the black (BK) ink bottle. Hold the ink bottle

upright and slowly turn the bottle cap to remove it.

Caution:

Do not shake or squeeze the ink bottles. Do not touch

the top of the ink bottle after its cap is removed.

3

Position the top of the ink bottle along the front of the

filling port, then slowly stand the bottle upright to insert it.

Note:

Do not force the bottles into position; they are keyed for

each color.

4

Wait for the ink to fill the tank. Do not squeeze the bottle.

Note:

Ink flows into the tank and stops automatically when the

ink tank is filled to the upper line. If ink does not flow from the

bottle, lift and reinsert the bottle.

5

When the ink tank is full, remove the ink bottle and

securely close it with the bottle cap.

Note:

Do not leave the ink bottle inserted; otherwise the bottle

may be damaged or ink may leak. If any ink remains in the bottle,

store the bottle upright for later use.