Table of Contents
•
The identity of the user causing an event is logged.
•
When the command log is exhausted by 80% and wraparound occurs, the event is logged and a trap is
generated.
•
Log messages have a maximum of 240 characters (the RMON event maximum string length) and are stored in
the command log buffer.
•
Log messages greater than the maximum length are truncated and are not stored in the command log buffer.
Syntax:
[no] logging command
Operating notes for debug and Syslog
•
Rebooting the switch or pressing the Reset button resets the debug configuration.
Debug option
logging (debug destination)
session (debug destination)
ACL (debug type)
All (debug type)
event (debug type)
IP (debug type)
•
Debug commands do not affect normal message output to the Event Log.
Using the debug event command, you can specify that Event Log messages are sent to the debug
destinations you configure (CLI session, syslog servers, or both) in addition to the Event Log.
•
Ensure that your syslog servers accept debug messages.
All syslog messages resulting from a debug operation have a "debug" severity level. If you configure the switch
to send debug messages to a syslog server, ensure that the server's syslog application is configured to accept
the "debug" severity level. (The default configuration for some syslog applications ignores the "debug" severity
level.)
•
Duplicate IP addresses are not stored in the list of syslog servers.
526
Effect of a reboot or reset
If syslog server IP addresses are stored in the startup-config file, they are
saved across a reboot and the logging destination option remains enabled.
Otherwise, the logging destination is disabled.
Disabled.
Disabled.
Disabled.
If a syslog server IP address is configured in the startup-config file, the
sending of Event Log messages is reset to enabled, regardless of the
last active setting.
If no syslog server is configured, the sending of Event Log messages is
disabled.
Disabled.
Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
Table of Contents
Troubleshooting
