Table of Contents
Description of the condition 1
■Constants related to the non-isolation slave module (Ihin, Iho)
In the non-isolation slave module, the current required for the internal control circuit and the connected load is supplied with
transmission cables (DP, DN).
■Ihin(A): Current consumption of the non-isolation input slave module/I/O combined slave module
= Current consumption of the non-isolation input slave module/I/O combined slave module + Current consumption of connected load (three-wire sensor)
Number of points
■Iho(A): Current consumption of the non-isolation output slave module
= Current consumption of the non-isolation output slave module + Current consumption of connected load Number of points
RJ51AW12AL
IN
OUT
24V 0V
24V 0V
DP DN
24V 0V
(1)
(1) 24VDC external power supply
(2) Non-isolation slave module
(3) Internal control circuit
(4) Power supply generation
(5) Connected load
• The 24VL and 0VL terminals of a slave module are used to supply the power to the connected load.
• For the current consumption of a non-isolation slave module, refer to the manual for the slave module used.
(2)
(3)
(4)
DP DN
0VL
0
24VL
(5)
5.2 Power Supply to the AnyWireASLINK System
1
n
5 SYSTEM CONFIGURATION
5
25
Table of Contents
