Local Administration - First Boot Assistant; Main Settings Managed By Fba - Safran MorphoAccess SIGMA Series Quick User Manual
Hide thumbs
Also See for MorphoAccess SIGMA Series:
- Administration manual (517 pages) ,
- Installation manual (81 pages) ,
- Administration manual (478 pages)
Table of Contents
Local Administration - First Boot Assistant
The First Boot Assistant (FBA) helps the administrator to
configure all the devices fundamental settings.
It is automatically launched at first terminal startup, but
can also be launched on demand, though administration
menu (i.e. to reinitialize terminal main settings)
The battery must be installed to prevent real time
clock loss on power off or power failure
18
2014_0000000530-V6
Date & Time Configuration: date & time, time zone
Language Configuration: user interface language
selection,
Trigger Event: select event(s) to be processed as an
access request by a user
Network Configuration: LAN or WLAN parameters
Recognition Mode: identification mode activation.
Protocol Configuration: select communication
protocol : Bioscrypt 4G terminals, MA 500 and J
Series (MA2G), or MorphoAccess SIGMA (MA5G)
Password Configuration: terminal administration
password modification
First Boot Configuration Storage Type: select
either temporary (i.e. for a short duration test, reboot
will restore previous values) or permanent storage
(applies to normal operation, new settings remains
after reboot) of the setting modified by FBA.
This document and the information therein are the property of
Morpho, They must not be copied or communicated to a third party
without the prior written authorization of Morpho.
Main settings managed by FBA
- Quick Links:
- Table of Contents
- Reset Button
Hide quick links:
Table of Contents
