2
PARAMETER SETTINGS
This chapter describes the parameter setting required for the RJ51AW12AL.
2.1
Parameter Setting Procedure
1.
Add the RJ51AW12AL to an engineering tool.
[Navigation window] [Parameter] [Module Information] Right click [Add New Module]
2.
The parameter setting includes a basic setting and refresh setting. Select the settings in the tree and set the items in the
following window.
[Navigation window] [Parameter] [Module Information] [RJ51AW12AL] [Module Parameter]
3.
Write the setting to the CPU module with the engineering tool.
[Online] [Write to PLC]
4.
Reset the CPU module or power off and on the system to apply the setting.
2 PARAMETER SETTINGS
48
2.1 Parameter Setting Procedure