Table of Contents
1.11
Slave Module Information Acquisition at Start-up
Function
This function allows for automatic acquisition of information of slave modules when the CPU module is reset or the power is
turned off and on.
The slave module information acquisition at start-up function eliminates the needs for reading parameters from slave
modules.
For the parameters of the slave module stored, refer to the following.
Page 33 Slave Module Parameter Read/Write
Setting method
Set the slave module information acquisition at start-up function in "Startup operating mode" of "Basic setting". ( Page 49
Startup operating mode setting)
Operation at start-up
When communication of the RJ51AW12AL is normally established after the CPU module is reset or the power is turned off
and on, the parameters of all the registered slave modules are read at a time. The read parameters are then stored in the
buffer memory.
1 FUNCTIONS
32
1.11 Slave Module Information Acquisition at Start-up Function
Table of Contents
Troubleshooting
