Table of Contents
Front Control UI, Light Pipe and Buttons
The front control console must be removed and
separated to access the UI, light pipe and buttons.
UI Removal
•
Remove four 1/4 in. hex head screws at the
bottom of the UI Board.
Four 1/4 in. hex
head screws
•
Tip the bottom of the UI to release from top tabs.
Front Console
UI
•
To remove the light pipe assembly, remove four
1/4 in. hex head screws at the top of the light
pipe.
Light Pipe
Buttons
•
The light pipe and buttons may now be removed.
UI
Light Pipe Assembly
Front Console
– 33 –
Pocket Handle (Front Control Only)
The pocket handle is attached to the inner door
panel. The front control console must be removed
as previously described in Front Control Console
Removal. Remove six 1/4 in. hex head screws.
The pocket handle is also clipped to the top
attachment strip of SS inner doors.
Top Control Panel, UI, Light Pipe and Buttons
Top Cover
Console
Buttons
Light Pipe
UI
Bottom
Cover
Lens
(Continued next page)
- Quick Links:
- Troubleshooting
- Consumer Error Mode
- Service Mode
Hide quick links:
Table of Contents
