5.3.6.12 Travel To Fixed Stop - Siemens SINUMERIK 840C Operator's Manual
Software oem version for windows
Hide thumbs
Also See for SINUMERIK 840C:
- Installation instructions manual (1154 pages) ,
- Diagnostics manual (260 pages) ,
- Installation manual (189 pages)
Table of Contents
01.99
5.3.6.12 Travel to fixed stop
T ra ve l to
fixed sto p
Note
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
Press the ETC key to extend the SETTING DATA softkey bar.
Press the softkey and the input screen is displayed with the configured axes.
You can use the function "Travel to fixed stop" to set-up defined forces for
clamping workpieces, e.g. tailstocks, sleeves, grippers, etc.
The clamping force for this function is entered in the input fields assigned to
the axes.
Input range: 0 to 999999
Tolerance: 0.1% of max. power setpoint (motor torque)
• The function "Travel to fixed stop" is an option.
• The function can be used for all axes.
• Spindles that are to travel to the fixed stop must first be switched to C axis
mode.
Machine manufacturer
The function "Travel to fixed stop" must be configured in the PLC user
program. Please refer to the documentation for the machine concerned.
6FC5198-6AA60-0BP1
5 Parameters
5-31
Table of Contents
