PLEASE GO TO THE BOTTOM OF THE LAST PAGE FOR FCC/IC AGENCY STATEMENTS PRELIMINARY DRAFT IIs – 01/12/15 This wireless passive infrared motion sensor is intended for use with Honeywell controls that support SiX™ series devices. Mounting Location • The optimal range is obtained at a mounting height of 7’...
Page 2
Enroll the RF6PIR The RF6PIR can be enrolled and programmed before or after installation. • Press down on the top latch and separate the front and back covers. • Set the Lyric Smart Controller in Programming Mode. • Remove the RF6PIR battery tab to activate and begin the enrollment process.
• Remove the front cover. • Replace the battery. Recommended replacement batteries: Panasonic CR123A Honeywell 466 Duracell DL123 or DL123A • Replace the front cover. BATTERY CAUTION: Risk of fire, explosion and burns. Do not recharge, disassemble, heat above 212° F (100°...
Page 4
For the latest U.S. warranty information, please go to www.honeywell.com/security/hsc/resources/wa or Please contact your local authorized Honeywell representative for product warranty information. 2014 Honeywell International Inc. Honeywell and is a registered trademark of Honeywell International Inc. All other trademarks are the properties of their respective owners. All rights reserved.