Toshiba B-FP3D SERIES Owner's Manual page 31

Before using a peel-off unit

When issuing labels in the peel-off mode, pull out the

peel-off roller before loading a label roll.

1. Open the Top cover, and push the lock lever in the

direction of the arrow.

Lock lever

2. This will pop-up the Peel-off Unit.

Refer to "Loading the Media" on the previous page

and set a label roll.

Peel-off Unit

NOTES:

1. DO NOT PULL the center of the Peel-off roller

hard. Doing so may break the Peel-off roller.

2. Do not forcibly pull out the Peel-off roller or push it

into the printer, otherwise the Peel-off roller may

break.

(GH30, GH40 models only)

Peel-off unit

30

 How to put away the Peel-off Roller

1. Gently press the Peel-off Roller Unit down, and

push it into the printer in the direction indicated by

the arrow until it clicks.

Peel-off Unit

.

Peel-off Unit