Toshiba B-FP3D SERIES Owner's Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Printer
  5. B-FP3D SERIES
  6. Owner's manual

Toshiba B-FP3D SERIES Owner's Manual

Show thumbs Also See for B-FP3D SERIES:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
Table Of Contents
39
Table of Contents

Quick Links

! 0 0 T S C C 0 3 1 7 7 0 1 !
Portable Printer
B-FP3D SERIES
Owner's Manual
Table of Contents
loading

Related Manuals for Toshiba B-FP3D SERIES

Summary of Contents for Toshiba B-FP3D SERIES

  • Page 1 ! 0 0 T S C C 0 3 1 7 7 0 1 ! Portable Printer B-FP3D SERIES Owner's Manual...
  • Page 2 CE marking is the responsibility of TOSHIBA TEC GERMANY IMAGING SYSTEMS GmbH, Carl-Schurz-Str. 7, 41460 Neuss, Germany. For a copy of the related CE Declaration of Conformity, please contact your dealer or TOSHIBA TEC. FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 3 For Taiwan  NCC 警語  低功率電波輻射性電機管理辦法第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使 用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條低功率射頻電機之使用不得影 響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項 合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻 射性電機設備之干擾.     For Mexico Bluetooth Module WiFi Module IFT: XX-XXXX IFT: YY-YYYY BT800 GS2100MIP Laird Gainspan - La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada  ...
  • Page 4 PRÉCAUTIONS! 1. N’utilisez que les packs batteries Toshiba Tec conçus et fabriqués pour être utilisés avec ce modèle spécifique. Il y a un risque d’explosion si la batterie est remplacée par un modèle non adapté. Veuillez vous débarrasser des batteries usagées en respectant la réglementation.
  • Page 5 < Português > ATENÇÃO! 1. Utilize as baterias desenhadas e fabricadas pela Toshiba Tec especificamente para este modelo. Existe risco de explosão se for utilizado um tipo de bateria incorrecta. Desfaça-se das baterias usadas de acordo com as instruções. B-FP3D-GH30-QM-R...
  • Page 6 English The following information is for EU-member states only: Disposal of products (based on EU-Directive 2002/96/EC, Directive on Waste electrical and electronic equipment – WEEE) The use of the symbol indicates that this product may not be disposed as unsorted municipal waste and has to be collected separately.
  • Page 7 Nederlands Onderstaande informatie geldt enkel in EU lidstaten: Het afdanken van producten (volgens EU-richtlijn 2002/96/EC, Richtlijn betreffende afgedankte elektrische en elektronische apparatuur – WEEE) Dit symbool geeft aan dat dit product niet mag afgedankt worden als algemeen huishoudelijk afval. Het dient afzonderlijk gecollecteerd te worden.
  • Page 8 For Europe For Bluetooth and Wirelss LAN Hereby, TOSHIBA TEC CORPORATION, declares that the BT800 and Gainspan are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This equipment uses a radio frequency band that has not been harmonized throughout all EU and EFTA countries, and can be used EU and EFTA countries.
  • Page 9 (8) Be sure to use a shielded interface cable. CAUTION! 1.This manual may not be copied in whole or in part without the prior written permission of TOSHIBA TEC. 2.The contents of this manual may be changed without notification. 3.Please refer to your local Authorised Service representative with regard to any queries you may have in this manual.
  • Page 10 Use the specified battery only. Failure to do this may cause fire or electric shock. • Danger of explosion if the battery is incorrectly replaced. Replace the battery only with a TOSHIBA TEC Corporation, Battery Pack Model B-FP803-BT-R 7.4V 2500mAh Li-ion. Discard used batteries according to the manufacturer's instruction.
  • Page 11 Pour Bluetooth et pour le wireless LAN TOSHIBA TEC CORPORATION déclare par la présente que le BT800 et le GS2100MIP sont en conformité avec les principales exigences et les dispositions pertinentes de la Directive 1999/5/EC. Cet équipement utilise une bande radiofréquence qui n’a pas été...
  • Page 12 Une telle conduite peut entraîner des blessures. De plus, toute règlements sur les équipements radio. Pour toutes réparations, veuillez vous adresser à votre agent commercial TOSHIBA TEC.. Précaution d’utilisation Ce produit communique en radio avec d’autres systèmes. En fonction de l’endroit où il est installé, de son orientation, de son environnement etc., ses performances de communication pourraient se détériorer, ou bien...
  • Page 13 (8) N’achetez et n’utilisez que des câbles interfaces blindés avec ce matériel. ATTENTION! 1. Ce manuel ne peut être copié, en entier ni en partie, sans l’autorisation écrite préalable de TOSHIBA TEC. 2. Le contenu de ce manuel est susceptible d’être modifié sans préavis.
  • Page 14 • Danger d’explosion si la batterie n’est pas remplacée correctement. Ne remplacez la batterie que par un modèle d’origine TOSHIBA TEC Corporation, le pack batterie modèle B-FP803-BT-R 7.4V 2500mAh Li-ion. Disposez des batteries usagées en vous conformant aux instructions du fabricant.
  • Page 15 警告 下面的指示表示如果對機器進行不恰當的與指示相違背的操作時，將可能引起嚴重傷害或者死亡的危險。  如果水或其他任何液體進入機器，請關閉電源。如果在這種情況下連續使用機器，可能會導致起火 或觸電。  如果機器外殼損壞或跌落，或受到的衝擊時，請關閉電源。如果在這種情況下連續使用機器，可能 會導致起火或觸電。  避免連續受陽光直接照射或高溫，因為這可能會導致火災。  不要擅自移除封蓋或改裝機器。這樣做可能會導致起火或觸電。  避免機器與水接觸，或使用濕手操作，或使用濕布清潔機身。否則可能會導致起火或觸電。  不要使用沾有稀釋劑或其它揮發性溶劑的布清潔機器，因為這可能會導致起火或觸電。  請嚴禁使用噴霧式清潔劑， 包括可燃氣體對機器進行清潔，否則將引起火災。  請僅使用指定型號的電池。否則可能會導致起火或觸電。  如果不按照正確的方式更換電池，可能會發生爆炸。請務必使用東芝泰格公司指定型號的電池 B- EP802-BT-QM-R 7.4 伏 2600 毫安的鋰離子或 B-FP804-BT-QM-R 14.8 伏 2600 毫安的鋰離子電池。請 根據製造商的指示丟棄廢舊電池。  不要擅自拆開和改裝電池，因為它有一個保護部件。否則可能會破壞這個保護部件，並導致電池的 升溫，爆裂或燃燒。  如果電池受潮，請將其完全晾幹。使用濕電池可能導致起火或觸電。 ...

  • Page 16: Media Specification

    Media Specification Print surface Feed direction Roll method: Labels facing outside Black Mark (Reverse Side） Print surface Roll method: Receipts facing outside Feed direction NOTES: 1. The ratio of “Label length” to “Gap length” must be 3:1 or more. 2.
  • Page 17 5. A label showing item code, and lot number must be attached to the paper core inside. For reference; Relationship between Paper Roll Length and Paper Core Diameter )  L: Paper length D: Paper roll diameter Label roll dia. (Paper roll dia.) d: Paper core outside diameter Paper...
  • Page 18 For label and receipt paper Media type Label Receipt With black Without Mode Batch Strip Item marks black marks Min. 10.0 13.0 10.0 – A Label pitch Max. 999.9 67.0 999.9 – Min. 10.0 – B Label length Max. 60.0 992.0 –...

  • Page 19: Care/Handling Of The Media

    CARE/HANDLING OF THE MEDIA CAUTION! Be sure to read carefully and understand the Supply Manual. Use only media that meets specified requirements. Use of non-specified media may shorten the head life and result in problems with bar code readability or print quality. All media should be handled with care to avoid any damage to the media or printer.

  • Page 20: Printer Specification

    Printer Specification Plus model Standard model 3" portable printer ( Direct Thermal ) GH30 (Bluetooth) GH40 (WLAN) GS30 (Bluetooth) GS40 (WLAN) Media Types Receipt / Tag / Label Receipt Resolution 203dpi ( 8dots/mm ) Max. Print speed Target : Max 6" (152mm) / sec Max.

  • Page 21: Software Tools

    Black mark Paper end Black mark Media sensors Paper end Cover Open Cover Open Peel-off sensor 1. AC Adapter 2. Spare battery 3. Battery Charger (1slot, 6slot) Option 4. Wireless charging function (Qi Charger) 5. Cigarette lighter adapter OPTION 6. Shoulder strap AC adapter Charging printer Cigarette lighter adapter (DC12V)
  • Page 22 Additional dedicated encryption HW engine to support higher layer encryption such as IPSEC (IPv4 and IPv6), SSL/TLS, HTTPs, PKI, digital certificates, RNG, etc.

  • Page 23: Daily Maintenance

    Daily maintenance To help retain the high quality and performance of your printer, it should be cleaned regularly cleaned. CAUTION!  DO NOT USE a sharp object to clean the print head or various rollers, as this may cause a print failure or breakdown of the printer.
  • Page 24 Media Sensor Window  Media Sensor Window and Media Path Remove dust or dirt from the Media Sensor Window with a commercially available soft, dry brush. Wipe clean the Media Path with a soft dry cloth. When linerless labels are used, wipe off dirt of residual glues from the Media Guides after the use of one or two media rolls.
  • Page 25 B-FP3D Series Print Head Media Sensor Platen Top Cover Peel-off Unit (GH30 and GH40 only Top Cover Open Button Battery Cover DCIN Connector Operation Panel Battery Lever Strap Slot USB Port Belt Clip Ferrite Core Print Head Cleaner M-3x8 Screws BD Address Label (2 pcs.)

  • Page 26: Operation Panel Functions

    Operation Panel Functions (11) (12) (10) POWER FEED PAUSE STATUS CHARGE NOTE: Do not touch the Operation panel with a sharp object, as the surface of the Operation panel is easily damaged. Name/Icon Function/Usage Icons indicating the printer statuses, such as the radio intensity, Liquid Crystal Display battery level, etc.

  • Page 27: Status Lamp

    Displayed when an error occurs on the printer. Error Battery level Indicates the battery level in 5 levels. Lights or blinks in green, red, or orange to indicate the printer status.  Lights up in green: Normal state  Lights up in orange: Low-battery warning state (Operable) ...
  • Page 28 Be sure to use only the battery pack designed and manufactured for use with the printer B-FP3D series Battery Pack: B-FP803-BT-R [B-FP3D Series]  When unpacked, the battery level of the supplied Battery Pack is not full. Please charge the Battery...

  • Page 29: Removing A Battery Pack

    Removing a battery pack Push the Battery Lever down in the direction of the arrow, and remove the Battery Pack from the printer by pulling on the tab. Battery Lever Open Battery Pack Charging the Battery Pack with an Optional Adapter When charging the battery pack in the printer using an optional AC Adapter, cigarette lighter adapter, or DC adapter, insert the plug of the adapter into DCIN...

  • Page 30: Loading The Media

    Paper Guide Guide NOTE: Lever  Please use TOSHIBA TEC approved media only. Toshiba TEC is not responsible for any print result caused by use of other media  When you order media, please contact the nearest TOSHIBA TEC representative.
  • Page 31 Before using a peel-off unit (GH30, GH40 models only) When issuing labels in the peel-off mode, pull out the  How to put away the Peel-off Roller peel-off roller before loading a label roll. 1. Gently press the Peel-off Roller Unit down, and 1.

  • Page 32: Shoulder Strap (Option)

    How to attach the accessories CAUTION! 1. Care should be taken not to drop the printer when securing it to your waist or slinging it over your shoulder. 2. For fixing the printer to your belt, the belt width should be 40 mm or less Use of the other belts may cause the printer to fall off .

  • Page 33: Data Transmission

    Data Transmission When using a USB cable to connect to the printer, put the ferrite core supplied with the printer on the cable, as shown below. Approx. 20 mm Wind the cable around the ferrite core one time. Host Printer Ferrite Core...
  • Page 34 4. Send data from the host to the printer. USB Cable USB Port NOTE:  For details of the interface cable, please consult the nearest TOSHIBA TEC representative.  When disconnecting the USB cable, please follow the instructions of the host system.
  • Page 35 The radio connectivity is affected by the operating Access Point environment. Especially, metal obstacles, metal powder, or locations enclosed by metal walls may prevent proper communication. For the installation location of access points, please Handy Terminal consult the nearest TOSHIBA TEC representative. [Wireless LAN]...

  • Page 36: Troubleshooting

    If you cannot solve a problem with the following solutions, do not attempt to repair it by yourself. Turn off the printer, remove the battery pack, then contact a TOSHIBA TEC service representative for assistance. If an error message is displayed.
  • Page 37 HIGH VOLT. ERROR The battery voltage is abnormal. If the problem recurs, please turn off the power and contact TOSHIBA TEC service representative. An error was detected while charging It could be the end of battery life.
  • Page 38 Load the media properly. The media used has deteriorated past Load a new media roll. its use date . The media is not a TOSHIBA TEC Printout is too light. Use TOSHIBA TEC approved media. The printer received print approved one data but does not print.

This manual is also suitable for:

B-fp3d-gh30-qm-rB-fp3d-gs30-qm-rB-fp3d-gs40-qm-rB-fp803-bt-rB-fp3d-gh40-qm-r

Table of Contents