Table of Contents
®
18-6
Route PLC-5
or SLC 500
Configure a PLC-5 or SLC
500 Message
Publication 1756-UM001E-EN-P - August 2002
™
™
Messages From a DH+
Network
IMPORTANT
A. Using either RSLogix 5 or RSLogix 500 software, as required,
open the project for the controller that sends the message.
B. If a SLC 500 controller sends the message, in the MSG
instruction, specify the following:
For this:
Target Device
Local/Remote
C. Display the set-up screen for the message.
This procedure uses RSLogix 5
software, revision 3.x.
For a message to a:
SLC 500 controller
PLC-5 controller
™
™
or RSLogix 500
Select:
500CPU
PLC5
Remote
Hide quick links:
Table of Contents
