Setting The Unit; Id Registration - Panasonic WX-CH455 Operating Instructions Manual

w ID registration

p

Before using this product, the unit ID must be registered in the Center Module. After the ID

is registered in the Center Module, wireless communication between this product and the

Center Module is enabled.

1

Set the Center Module to "ID Registration" mode.

Refer to the operating instructions of the Center Module.

2

Rotate the microphone boom to turn off the power of this product.

3

Rotate the microphone boom while holding down the [T] and [P] buttons to turn

on the power of this product.

p ● This product enters the ID Registration setting mode. You will hear "Registration

Mode" and the power indicator will blink orange.

4

Press the [T] button.

p ● You can hear "Connecting Center Module A" and the lane Indicator will blink orange.

p ● When the Center Module is WX-CC412/WX-CC412A, ID registration for Lane B is

automatically started, the voice message "Connecting Center Module B" is heard

from the earphone, and the lane indicator blinks green.

p ● When the ID Registration succeeds, you will hear "Registration complete", "Headset

xx" (xx: ID number registered in the Center Module), and the power indicator stops

blinking and stays on.

24

WX-CH455_PGQX2221ZAC1.indb

24

Power indicator

[T] button

[P] button

Lane indicator

2017/08/21

16:11:10