Table of Contents
Quick Links
See also:
Instruction Manual
Table of Contents
Related Manuals for Panasonic WX-CH2050
Summary of Contents for Panasonic WX-CH2050
-
Page 1: Operating Instructions
All-in-One Headset Operating Instructions WX-CH2050 Model No. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. - Page 2 1-800-8-BATTERY for information on how to recycle this battery. Matsushita Electric Corporation of America 1707 N. Randall Rd., Elgin IL. 60123 Panasonic Consumer Electronics Company 866-472-6767 The serial number of this product may be found in the bat- tery compartment of the unit.
-
Page 3: Table Of Contents
● Operation Mode Setup ...12 INTRODUCTION The WX-CH2050 is an all-in-one headset designed for use in wireless communication systems, which are use in Drive thru menu boards, etc. It incorporates such necessary devices as a microphone and earphone, as well as a battery compartment and control buttons. -
Page 4: Names & Functions
NAMES & FUNCTIONS SERVICE USE ONLY GROUP VOL. - Page 5 q Head Band and Head Pad Adjustable to your head by sliding the head pad. w Battery Lock [EJECT] When removing the battery, slide out the lock. When loading a new battery, insert the battery until the lock clicks. e Battery (Optional accessory) See PRECAUTIONS.
-
Page 6: Operating Procedures
OPERATING PROCEDURES Notes: • Transmission using the talk [T] or page [P] button is allowed for a single headset at a time. A continuous beep or distorted sound will be heard in a headset that tries to transmit while another person is operating. •... -
Page 7: Communications With Customers [Talk]
● Communications with Customers [TALK] Any store personnel wearing the headset can communicate bidirectionally with any customer who is at the menu board. 1. Select a proper sound level by pressing the [▲] or [▼] button. 2. You will hear a tone in the headset when a vehicle arrives at the menu board. -
Page 8: Battery Loading & Replacement
BATTERY LOADING & REPLACEMENT Notes: • Refer to operating instructions included with the battery and battery charger. • Battery replacement is recommended when the power indicator lights up in red and a pulsing beep is heard in the headphone. ● Loading 1. -
Page 9: Troubleshooting
TROUBLESHOOTING Phenomenon The power indicator blinks in red. The power indicator lights up in red. Cannot turn on the headset. Cannot communicate with other store personnel or the customer at the menu board. Cannot hear or talk to the customer, while communications with the store personnel are OK. -
Page 10: Setup Procedures
SETUP PROCEDURES Caution: Setup of this product should only be performed by qualified service personnel or system installers. ● Opening the Switch Pocket 1. Press the power button to turn off the headset. 2. Open the switch pocket adjacent to the ear pad using the supplied screwdriver. -
Page 11: Dip Switch Setup
● DIP Switch Setup An eight-bit DIP switch is provided for system setups. The initial setting is marked with an asterisk *. Function Location USA* Tone Squelch Talk Lock Resumption 1. Press the power button to turn off the headset. 2. -
Page 12: Operation Mode Setup
● Operation Mode Setup Three operation modes can be set up to adapt the headset to your requirements. • Default channel setup • Talk lock/ Talk PTT (press to talk) • Page lock/Page PTT Indicator A/B channel Power — — Blink Blink —... - Page 13 1. Press the power button to turn off the headset. 2. While holding down the talk [T] and page [P] buttons simultaneously, press the power button to turn on the headset. The headset enters the setup mode where the indica- tors and buttons have different functions than in normal operation.
- Page 14 Panasonic Digital Communications & Security Company Unit of Matsushita Electric Corporation of America Information Systems Group Zone Office 1707 N.Randall Road, Elgin, IL 60123 (866) 472-6767 2003 © Matsushita Electric Industrial Co., Ltd. All rights reserved. PANASONIC CANADA INC. 5770 Ambler Drive, Mississauga,...