Table of Contents
System Parameters
Configurable Functions
A name can be assigned to the application configured and to safety laser
scanners. The names are saved in the devices after the configuration is
transferred. The name that is chosen can be, for example, the identifier for the
vehicle, system or the machine.
You enter the application name and the names of the safety laser scanners that are used in the SCD
software.
Application Name
Enter a name for your application. You can enter a name with a maximum of
16 characters.
If you assign unique application names, you can reserve the devices for certain
duties. When a machine maintenance person compares exchanged devices with
the configuration data that is saved in the SCD software they are notified that
the application name does not match. They can then exchange these devices for
devices with the correct application name.
Name of the Scanner
Enter a device name for each of the safety laser scanners in the system. You can
enter names with a maximum of eight characters.
IMPORTANT Use meaningful names (example: "front" and "rear") for vehicle monitoring.
Unique device names make the subsequent configuration steps easier (for
example, on control inputs allocation or the OSSDs).
User Data
You can enter your name in the field Name of the user. You can enter a name
with a maximum of 22 characters. The name is added to the configuration
protocol and in the diagnostics report.
Rockwell Automation Publication 442L-UM005B-EN-P - April 2017
3
Chapter
25
Hide quick links:
Table of Contents
