Allen-Bradley GuardShield Micro 400 Installation Instructions Manual page 18

GuardShield Micro 400 Safety Light Curtains

Technical Specifications

Attribute

Safety Ratings

Standards

Safety classification

Probability of a dangerous failure per hour PFH

Certifications

Outputs

Micro 400 outputs

MSR41/MSR42 outputs

Non-safety outputs

Switching current @ voltage, max

Operating Characteristics

Response time

Indicator LEDs

Protected height

Resolution

Scanning

Range/resolution

Synchronization

Wave length

Time for self check when switching on U

sp

Environmental

Enclosure type rating

Relative humidity

Operating temperature

Storage temperature

Vibration

Shock

Power supply

Input power, max

Maximum residual ripple

Power consumption

Equipment class

EMC

Physical Characteristics

Number of beams, max

Standard mounting

Weight

Housing cross section

Optical window

Enclosure and enclosure treatment

Connection type

Cable length

Patchcords

18

Value

IEC/EN61496 Parts 1 and 2, UL61496 Parts 1 and 2, UL1998

Type 4 per IEC/EN61496. Category 4 device per EN 954-1, SIL 3 per IEC 61508, PLe per EN/ISO 13849-1

6.0 E-9 1/h MSR42 or MSR41 and MSR45E

4.0 E-9 1/h Micro 400

c-UL-us Listed, TÜV, and CE Marked for all applicable directives

Data output to controller (MSR41 or MSR42)

Two 400 mA OSSD

Auxiliary outputs from MSR41 or MSR42 controller—2 configurable 100 mA, outputs

400 mA @ 24V DC

14 mm (0.55 in.): 12...42 ms, varies by protective height and resolution, protective height 150...1200 mm (5.95...47.24 in.)

30 mm (1.18 in.); 11...23 ms, varies by protective height and resolution, protective height 150...1200 mm (5.95...47.24 in.)

ON -State, OFF-State, Intensity, lockout

Standard slim profile: 50...1200 mm (1.97...47.2 in.) in 50 mm (1.97 in.) increments

Re-inforced profile: Up to 2200 mm (86.6 in.)

14 mm (0.55 in.), 30 mm (1.18 in.), or PAC (Perimeter)

14 mm (0.55 in.) resolution: 0...5 m (16.4 ft)

30 mm (1.18 in.) resolution: 0...5 m (16.4 ft)

Electrical through MSR41 or MSR42

940 nm

< 5 s

Micro 400 is IP54;

Micro 400 IP69K is IP65, IP66, IP67, IP68, IP69K, Plug: IP65

15...95% (noncondensing)

0...55 °C (14...131 °F)

-20...+70 °C (4...158 °F)

IEC 60068-2-6; Frequency 10...55 Hz; Amplitude 0.35 mm (0.01 in.)

IEC 60068-2-29; Acceleration 10 g, pulse duration 16 ms 10...55 Hz;

Amplitude 0.35 mm (0.01 in.)

Input power from MSR41 or MSR42 controller

24V DC ±15%

(MSR41 or MSR42 controller)

5% of Vss

0.07 A max (no load)

III (VDE 0106 part 100)

IEC 61496 part 1

255

180° adjustable mounting brackets supplied

(two sets 445L-AF6143)

Varies by protective height

Slim profile (standard): 15 mm x 20 mm (0.59 x 0.79 in.)

Re-inforced profile (special): 30 mm x 40 mm (1.18 x 1.57 in.)

Polycarbonate

Aluminum, polyester powder coated, silicon free

Transmitter/receiver: 8-pin M12 micro QD

1, 2, 3, 5, and 8 m (3.3, 6.6, 9.8, 16.4, and 26.2 ft) cable M12 to RJ45 for MSR41 or MSR42.

Max total system length cannot exceed 10 m (32.8 ft).

1 m, 3 m, and 5 m (3.3 ft, 9.8 ft, and 16.4 ft) M12 to M12 patchcords.

Total system length cannot exceed 10 m (32.8 ft) including protective height of Micro 400, integrated cables and patchcords from M12 connector to MSR41 or

MSR42.

Rockwell Automation Publication 445L-IN005A-EN-P - May 2018