Propeller Shafts; Precautions; Propeller Shaft Caution; General Description - Suzuki Grand Vitara Service Manual
Driveline / axle
Hide thumbs
Also See for Grand Vitara:
- Owner's manual (1736 pages) ,
- Service manual (836 pages) ,
- Supplementary service manual (481 pages)
Table of Contents
3D-1 Propeller Shafts:
Propeller Shafts
Propeller Shaft Caution
CAUTION
!
• All propeller shaft fasteners are an important attaching part in that it could affect the performance of
vital parts and systems, and/or could result in major repair expense. They must be replaced with one
of the same part number or with an equivalent part if replacement becomes necessary. Do not use a
replacement part of lesser quality or substitute design. Torque values must be used as specified
during reassembly to assure proper retention of this part.
• Never attempt to heat, quench or straighten any propeller shaft part. Replace it with a new part, or
damage to the part may result.
Propeller Shaft Construction
Most universal joints and ball joints require no maintenance. They are lubricated for life and can not be lubricated on
the vehicle. If a universal joint becomes noisy or worn, it must be replaced.
The propeller shaft is a balanced unit. Handle it carefully so that balance can be maintained.
[A]: Front propeller shaft
[B]: Rear propeller shaft
1. Front propeller shaft flange bolt
: Apply thread lock 99000-32110 to bolt thread.
2. Rear propeller shaft flange nut
3. Support washer
www.CarGarage.ir
Precautions
General Description
4. Spider joint assembly
: Apply grease (99000-25030) to spider bearing race.
5. Circlip
: 85 N⋅m (8.5 kgf-m, 61.5 lb-ft)
: 30 N⋅m (3.0 kgf-m, 22.0 lb-ft)
: Do not reuse.
www.CarGarage.ir
S5JB0A3400001
S5JB0A3401001
I5JB0A340001-02
Table of Contents
