Texas Instruments AM437x User Manual

Linux™

Begin development

8

10

You are now ready to explore

the Linux demos which

include various example

applications. Click on any

icon to start the demo and

click "exit" (if available) to quit

the demo.

9

Plug in the camera board

(included) as shown and

click on the camera demo

icon to view two camera

inputs on the screen. If the

camera board is not plugged

in, a single camera input will

be displayed.

For more information on AM437x processors, including:

• User Guide

• How Tos

• Software

• Design Files

Please visit

www.ti.com/am437x

and

www.ti.com/am437xevm

For support questions, please contact:

Provide feedback: Take this survey and tell us about your experience using the AM437x EVM:

Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TI's standard terms and conditions of sale. Customers are

advised to obtain the most current and complete information about TI products and services before placing orders. TI assumes no liability for applications assistance, customer's applications or product

designs, software performance, or infringement of patents. The publication of information regarding any other company's products or services does not constitute TI's approval, warranty or endorsement

thereof.

Trademarks in this issue:

The platform bar and Sitara are trademarks of Texas Instruments. All other trademarks are the property of their respective owners.

© 2014 Texas Instruments Incorporated

Printed in U.S.A. by (Printer, City, State)

Linux Software Development Kit

From a Linux host PC, insert the

Linux µSD card into the PC, and

from the START HERE folder, run

setup.htm

.

If you need help on setting up a

Linux Host PC, please visit

www.ti.com/startyourlinux

Connect the supplied USB cable

To prepare your

to the micro USB connector on the

workstation for software

AM437x EVM and plug the other

development, power off

end to your PC.

the kit, remove the

Connect the supplied Ethernet

microSD card; insert it

cable to the RJ-45 jack on the

into the included SD

AM437x EVM. Connect the other

card adapter (if

end of the cable to an Internet-

applicable); and insert it

enabled router or Ethernet switch.

into your PC. If your PC

does not include an SD

slot, USB SD card

adapters are readily

available. Follow the

instructions below.

or

www.ti.com/e2e

.

www.ti.com/survey

.

AM437x Evaluation Module

Quick Start Guide

Manufactured by Mistral Solutions Pvt. LTD. •

SPRW256

For more information:

www.ti.com/am437xevm

www.mistralsolutions.com/