Table of Contents
4.7.3 Programming the Pipe Menu when Wetted selected
4.7.3.1 Setting the Pipe OD, ID, and Wall Thickness
Sensor Setup
Meter Setup
Mounting Type
Pipe
Transducer
Pipe
Pipe OD
Pipe ID
Wall Thickness
Pipe Material
Pipe OD
Pipe OD
89.760
mm
Pipe OD
UNIT:
mm
89.760
]UNDO [
]SAVE
]MODF
]MOVE
[
IMPORTANT: Changing the
hanging the Wall
c
AquaTrans™ AT600 User's Manual
Pipe
Select
and press [√]. The following screen opens.
In the Sensor Setup menu, select P
press [√]. A screen similar to the following opens.
Press [√] again, and a screen similar to the following opens.
Note: The units shown are the units selected in the Units Setting menu.
Use the [] or [] key to select a specific digit, then use the [] or [] key
to change that digit as required. After all digits are correct, press
save. Then, press [
Pipe ID
to enter the
Pipe
menu.
Pipe ID
(Inside Diameter) automatically changes the
Thickness automatically changes the
ipe OD, Pipe ID
] to return to the previous screen. Repeat these steps
Wall Thickness
and
. Then, press [
Pipe ID
.
Chapter 4. Initial Setup and Programming
Wall Thickness
or
] to return to the
Wall
Thickness. Similarly,
and
[
] t
o
69
Hide quick links:
Table of Contents
