Quick Start Guide
9
Assemble the segmented cone antenna
This section applies to the segmented cone antenna (option code S2). Use
only one segment; the total antenna length should not exceed 47.2 in. (1200
mm).
Figure 9-1:
A. Min. 0.4 in. (10 mm)
Procedure
1. Insert the segment into the cone antenna until it bottoms.
2. Mark where to cut the segment.
3. Remove and cut the segment at the marking.
32
Installation Recommendation
Rosemount 5408 and 5408:SIS Level Transmitters
March 2018