Allen-Bradley PowerFlex 700 Technical Data Manual page 7
Adustable frequency ac drive
Hide thumbs
Also See for PowerFlex 700:
- Quick start manual ,
- User manual (198 pages) ,
- Installation instructions manual (96 pages)
PowerFlex 700 Technical Data
Factory Installed Options
Conformal Coat (Position d = M)
Description
Conformal Coat
Printed circuit boards are coated with HumiSeal 1B73
acrylic coating to provide improved resistance to dust and
moisture. Consult factory for additional details.
‡
Only available with Vector Control option.
Human Interface and Wireless Interface Modules (Pos. e)
Cat. Code: 0
No HIM (Blank Plate)
IP20, NEMA/UL Type 1
Cat. Code: J
Remote (Panel Mount) LCD
Display, Full Numeric Keypad
IP66, NEMA/UL Type 4x/12
Documentation
Description
Manual
No Manual
Control and I/O Options
Control
Vector Control (Series B) - 24V
DC‡♠
Vector Control (Series B) - 115V
‡
Vector Control option utilizes DPI Only.
♠
Frames 7...10 MUST select a Vector Control option.
Internal Communication Adapters
Description
ControlNet™ Communication Adapter (Coax)
DeviceNet™ Communication Adapter
EtherNet/IP™ Communication Adapter
20B-TD001F-EN-P
‡
Frame
0...10
Cat. Code: 3
LCD Display, Full Numeric
Keypad
IP20, NEMA/UL Type 1
Cat. Code: K
Remote (Panel Mount) LCD
Display, Programmer Only
IP66, NEMA/UL Type 4x/12
Cat. Code
(Position f)
Cat. Code
(Position k)
AC‡♠
Cat. Code
(Position j)
Internal Brake IGBT
Drive Input Voltage
208...480V AC
208...480V AC
208...690V AC
208...690V AC
The Internal Brake IGBT option cannot be field installed.
Internal Dynamic Brake Resistors
These resistors have a limited duty cycle. Refer to the PowerFlex
Dynamic Braking Selection Guide to determine if an internal
resistor will be sufficient. An external resistor may be required.
Drive Input
Voltage
208...240V AC
380...600V AC
380...480V AC
Internal EMC Filter and Common Mode Choke
Drive Input
Voltage
208...240V AC 3
208...240V AC 0...3
208...240V AC 4...6
380...480V AC 0...6
380...480V AC 7...10
600...690V AC 0...6
Note: 600V class drives below 77 Amps (Frames 0-4) are declared to meet
the Low Voltage Directive. It is the responsibility of the user to determine
compliance to the EMC directive.
§
Applies only to the 52 Amp drive.
Frames 7...10, 400/480V AC drives meet CE certification requirements
when installed per recommendations (refer to the User Manual, publication
A
20B-UM002).
N
Feedback Options (Vector Control Only)
No Encoder
12V/5V Encoder
ä
C
Encoder option can also be used as a pulse input.
D
Special Firmware
60 Hz Maximum
Cascading Fan/Pump Control
82 Hz Maximum
C
Pump Off (for Pump Jack)
D
Must be used with Vector Control option C or D (position k), Frames 0...6
E
only.
Brake IGBT
Frame
Standard
0...3
Optional
4
Optional
5
Optional
6
Brake Resistance
Frame
Ω
0
62
1 (2...5 Hp)
62
1 (7.5 Hp)
22
2
22
0
115
1
115
2
68
Common
Frame
CE Filter
Mode Choke
§
w/Filter
with Choke
w/Filter
No Choke
w/Filter
with Choke
w/Filter
with Choke
No Filter
No Choke
with Choke
w/Filter
Description
Description
Cat. Code
(Position g)
Y
Y
Y
Y
Cat. Code
(Position h)
Y
Y
Y
Y
Y
Y
Y
Cat. Code
(Position i)
A
B
A
A
N
A
Cat. Code
(Position l)
0
1
Cat. Code
(Position m...n)
NNAD
NNAE
NNAX
NNBA
7
