Table of Contents
Getting Started
Fitting Batteries
1
Cover fixing screws.
2
Rechargeable NiCad pack Part no.
191-126
3
Six alkaline C-cells Type no. LR14.
Caution:
Old batteries can leak and cause corrosion. Never leave
discharged batteries in the instrument.
Note: After fitting a rechargeable NiCad battery pack the display may show the battery
low indication caused by the battery pack not being fully charged. Use the power
adaptor/charger to fully charge the pack.
Switching On
Press the I/O switch on the front panel and proceed as follows.
The first time the instrument powers up, it will be in BASIC mode with the main screen
displaying voltage in the input display area and pressure in the output display area. To
switch to CURRENT as input, press F1 as shown. Similarly, F1 to return to VOLTAGE.
Note: No other keys are active in this mode and the instrument can only be reconfigured
by pressing the TASK key and selecting another mode.
2
3
7
1
K415 Issue No. 1
- Quick Links:
- Operator Controls
Hide quick links:
Table of Contents
