Table 2 - Basic Display Configuration - Honeywell STT850 Quick Start Manual
Smartline temperature
transmitter
Hide thumbs
Also See for STT850:
- User manual (94 pages) ,
- Quick start manual (11 pages) ,
- Quick start manual (8 pages)
Table of Contents
LCD Contrast
Rotation Time
Screen Rotate
Select Screen
(HART/DE)
Screen #
(HART/DE)
Select # PV
(HART/DE)
Database
updates take 30
seconds to
complete. Do not
interrupt power.
Screen Decimal
(HART/DE)
Screen Units
(HART/DE)
(Writable only for
TC/RTD inputs)
Range/Cal Units
(Visible for TC and
RTD inputs only)
Select Input
(HART/FF)
(Dual input only)
Sensor n Type
(Read only for FF)
Database updates
take 30 seconds to
complete. Do not
interrupt power.
20
Table 2 – Basic Display Configuration
»»»»»
Enabled
Disabled
1 through 8
Enabled/Disabled
Loop PV
Sensor 1
Sensor 2
CJ Temperature
Sensor 1
Resistance
Sensor 2
Resistance
Loop Output
Percent Output
None
X.X
X.XX
X.XXX
°C, °F,°R, K
°C, °F, °R, K
1, 2
mV, TC, RTD,
Ohm
Quick Start Installation Guide
Adjust the LCD contrast
level.
Range from » (1) to
»»»»»»»»» (9)
Default: »»»»»»» (7)
Select to enable or
disable the automatic
rotation of Screens
Select Screen to
configure.
Select to enable or
disable the screen for
display and configuration
Select the Process
Variable (PV) that will be
shown on the screen.
Sensor Resistance is only
available for RTDs and
will read 0 for
thermocouples
Select the PV decimal
resolution to be shown on
selected screen from list.
Choose appropriate
engineering units from list
Select the ranging and
calibration temperature
units
Select Input number to
configure, referred to as
"n" in subsequent menu
items
Select Sensor Type.
Press ↵ to
enter
menu
selection
↑ and ↓ to
select
entry.
↵ to enter
September 2017
Table of Contents
