Show Radius Accounting - Cisco NCS 5000 Series Manual
System security command reference for cisco ncs 5000 series
routers
Hide thumbs
Also See for Cisco NCS 5000 Series:
- Hardware installation manual (72 pages) ,
- Manual (188 pages)
Table of Contents
Authentication, Authorization, and Accounting Commands
show radius accounting
To obtain information and detailed statistics for the RADIUS accounting server and port, use the show radius
accounting command in the XR EXEC mode
show radius accounting
Syntax Description
This command has no keywords or arguments.
Command Default
If no RADIUS servers are configured on the router, the output is empty. If the default values are for the counter
(for example, request and pending), the values are all zero because the RADIUS server was just defined and
not used yet.
Command Modes
XR EXEC mode
Command History
Release
Release 6.0
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
Task ID
aaa
Examples
The following sample output is displayed on a per-server basis for the show radius accounting command:
RP/0/RP0/CPU0:router# show radius accounting
Server: 12.26.25.61, port: 1813
0 requests, 0 pending, 0 retransmits
0 responses, 0 timeouts, 0 bad responses
0 bad authenticators, 0 unknown types, 0 dropped
0 ms latest rtt
Server: 12.26.49.12, port: 1813
0 requests, 0 pending, 0 retransmits
0 responses, 0 timeouts, 0 bad responses
0 bad authenticators, 0 unknown types, 0 dropped
0 ms latest rtt
Server: 12.38.28.18, port: 29199
0 requests, 0 pending, 0 retransmits
0 responses, 0 timeouts, 0 bad responses
Operations
read
System Security Command Reference for Cisco NCS 5000 Series Routers
show radius accounting
Modification
This command was introduced.
71
- Quick Links:
- Aaa Accounting
- Secure Shell Commands
- Sftp
Hide quick links:
Table of Contents
