Key (Key Chain) - Cisco NCS 5000 Series Manual
System security command reference for cisco ncs 5000 series
routers
Hide thumbs
Also See for Cisco NCS 5000 Series:
- Hardware installation manual (72 pages) ,
- Manual (188 pages)
Table of Contents
Keychain Management Commands
key (key chain)
To create or modify a keychain key, use the key command in keychain-key configuration mode. To disable
this feature, use the no form of this command.
key key-id
no key key-id
Syntax Description
key-id
Command Default
No default behavior or values
Command Modes
Keychain-key configuration
Command History
Release
Release 6.0
Usage Guidelines
For a Border Gateway Protocol (BGP) keychain configuration, the range for the key-id argument must be
from 0 to 63. If the range is above the value of 63, the BGP keychain operation is rejected.
Task ID
Task ID
system
Examples
The following example shows how to use the key command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# key chain isis-keys
RP/0/RP0/CPU0:router(config-isis-keys)# key 8
RP/0/RP0/CPU0:router(config-isis-keys-0x8)#
48-bit integer key identifier of from 0 to 281474976710655.
Operations
read, write
System Security Command Reference for Cisco NCS 5000 Series Routers
key (key chain)
Modification
This command was introduced.
121
- Quick Links:
- Aaa Accounting
- Secure Shell Commands
- Sftp
Hide quick links:
Table of Contents
