Table of Contents
Views
VLAN view
Predefined user roles
network-admin
mdc-admin
Parameters
start-ip-address: Specifies the start IP address.
end-ip-address: Specifies the end IP address. The end IP address must be higher than or equal to
the start IP address.
Usage guidelines
The gateway discards an ARP packet if its sender IP address is not within the allowed IP address
range.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Specify the sender IP address range 1.1.1.1 to 1.1.1.20 for ARP packet checking in VLAN 2.
[Sysname] vlan 2
[Sysname–vlan2] arp sender-ip-range 1.1.1.1 1.1.1.20
639
Table of Contents
