Table of Contents
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. This option is available only when you specify the
device. If you do not specify a card, this command displays information about IPv4 scanning
attackers for all cards. (In IRF mode.)
count: Displays the number of matching IPv4 scanning attackers.
Usage guidelines
If you do not specify any parameters, this command displays information about all IPv4 scanning
attackers.
Examples
# (In standalone mode.) Display information about all IPv4 scanning attackers.
Slot 1:
IP address
192.68.11.2
Slot 2:
IP address
# (In standalone mode.) Display the number of IPv4 scanning attackers.
Slot 1:
Totally 1 attackers.
Slot 2:
Totally 0 attackers.
Table 80 Command output
Field
Totally 1 attackers
IP address
VPN instance
DS-Lite tunnel peer
Detected on
Duration(min)
Related commands
display attack-defense scan victim ip
scan detect
display attack-defense scan attacker ipv6
Use display attack-defense scan attacker ipv6 to display information about IPv6 scanning
attackers.
VPN instance
DS-Lite tunnel peer
--
--
VPN instance
DS-Lite tunnel peer
Description
Total number of IPv4 scanning attackers.
IPv4 address of the attacker.
MPLS L3VPN instance to which the attacker's IPv4 address belongs. If the
IPv4 address is on the public network, this field displays hyphens (--).
This field is not supported in the current software version.
IPv6 address of the DS-Lite tunnel peer.
If the device is the AFTR of a DS-Lite tunnel, this field displays the IPv6
address of the B4 element from which the packet comes.
In other situations, this field displays hyphens (--).
Where the attack is detected: the device (Local).
The amount of time the attack lasts, in minutes.
Detected on
Local
Detected on
545
Duration(min)
782
Duration(min)
Table of Contents
