Gcd-Cp10 Network Setup - NEC UNIVERGE SV9100 Configuration Manual

Issue 1.0

3.2

8

Values shown are for example purposes only. Your actual IP values will be

determined by your local LAN administrator.

Figure 4 GCD-CP10 Network Setup

10-12-1 : GCD-CP10 Network Setup – IP Address

Set the LAN IP address for the system Ethernet port to 192.168.0.10

10-12-2 : GCD-CP10 Network Setup – Subnet Mask

Set the subnet mask for the system Ethernet port to be different than the subnet

for the IPLE blade.

10-12-3 : CCD-CP10 Network Setup – Default Gateway

Set the default gateway for the IPLE blade.

SIP Trunking Service Configuration Guide

IDT/Net2Phone