Pbr Configuration (Using A Qos Policy) - HP 3600 v2 series Configuration Manual
Hide thumbs
Also See for 3600 v2 series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
To do...
Display the specified PBR routing
information
Display PBR statistics
Display the PBR policy information
Clear PBR statistics
NOTE:
If a policy has a node with no if-match or apply clause configured, all packets can pass the policy.
•
However, no action is taken and the packets will not go to the next policy node for a match. The statistics
of PBR will be changed.
If a policy node has if-match clauses, but no apply clauses configured, packets will match against these
•
if-match clauses. However, no apply clauses are applicable to the permitted packets, and the packets
will not go to the next policy node for a match. The statistics of PBR will be changed.
If a policy node has no if-match clause, but apply clauses configured, all packets can pass the policy,
•
and then are forwarded according to the apply clauses if the permit keyword is specified for the node,
or are denied if the deny keyword is specified. The packets will not go to the next policy node for a
match. The statistics of PBR will be changed.
If the match mode of a policy node is deny, no apply clause will be executed for the packets satisfying
•
all the if-match clauses, and the packets will not go to the next policy node for a match. They will be
forwarded according to the routing table instead. Neither debugging information nor statistics for the
deny match mode can be displayed.
PBR configuration (using a QoS policy)
To do...
Display user-defined QoS policy
configuration information
Display QoS policy configuration on
the specified interface or on all
interfaces
Display VLAN QoS policy
information
Display information about global
QoS policies
Use the command...
display ip policy-based-route setup
{ interface interface-type interface-number |
local | policy-name } [ | { begin | exclude |
include } regular-expression ]
display ip policy-based-route statistics
{ interface interface-type interface-number |
local } [ | { begin | exclude | include }
regular-expression ]
display policy-based-route [ policy-name ]
[ | { begin | exclude | include }
regular-expression ]
reset policy-based-route statistics
[ policy-name ]
Use the command...
display qos policy user-defined [ policy-name
[ classifier tcl-name ] ] [ | { begin | exclude |
include } regular-expression ]
display qos policy interface [ interface-type
interface-number ] [ inbound | outbound ] [ | { begin
| exclude | include } regular-expression ]
display qos vlan-policy { name policy-name | vlan
vlan-id } [ slot slot-number ] [ inbound | outbound ]
[ | { begin | exclude | include } regular-expression ]
display qos policy global [ slot slot-number ]
[ inbound | outbound ] [ | { begin | exclude |
include } regular-expression ]
384
Remarks
Available in any view
Available in any view
Available in any view
Available in user view
Remarks
Available in
any view
Available in
any view
Available in
any view
Available in
user view
- Quick Links:
- Ip Routing Basics
Hide quick links:
Table of Contents
Troubleshooting
