Protocols And Standards; Is-Is Configuration Task List - HP 3600 v2 series Configuration Manual
Hide thumbs
Also See for 3600 v2 series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Dynamic host name mapping mechanism
The dynamic host name mapping mechanism provides the mappings between the host names and the
system IDs for the IS-IS routers. The dynamic host name information is announced in the dynamic host
name CLV of an LSP.
This mechanism also provides the mapping between a host name and the DIS of a broadcast network,
which is announced in the dynamic host name TLV of a pseudonode LSP.
A host name is easier to remember than a system ID. After enabling this feature on the router, you can see
the host names instead of system IDs using the display command.
BFD
NOTE:
For more information about BFD, see
Bidirectional forwarding detection (BFD) provides a single mechanism to quickly detect any link failures
between IS-IS neighbors to reduce network convergence time.
Protocols and standards
•
ISO 10589 ISO IS-IS Routing Protocol
ISO 9542 ES-IS Routing Protocol
•
ISO 8348/Ad2 Network Services Access Points
•
RFC 1 195, Use of OSI IS-IS for Routing in TCP/IP and Dual Environments
•
RFC 2763, Dynamic Hostname Exchange Mechanism for IS-IS
•
•
RFC 2966, Domain-wide Prefix Distribution with Two-Level IS-IS
RFC 3277, IS-IS Transient Blackhole Avoidance
•
RFC 3358, Optional Checksums in ISIS
•
RFC 3373, Three-Way Handshake for IS-IS Point-to-Point Adjacencies
•
RFC 3567, Intermediate System to Intermediate System (IS-IS) Cryptographic Authentication
•
•
RFC 3719, Recommendations for Interoperable Networks using IS-IS
RFC 3786, Extending the Number of IS-IS LSP Fragments Beyond the 256 Limit
•
RFC 3787, Recommendations for Interoperable IP Networks using IS-IS
•
RFC 3784, IS-IS extensions for Traffic Engineering
•
RFC 3847, Restart signaling for IS-IS
•
IS-IS configuration task list
Complete the following tasks to configure IS-IS:
Task
Configuring IS-IS
basic functions
High Availability Configuration Guide
Enabling IS-IS
Configuring the IS level and circuit level
Configuring the network type of an interface as P2P
143
.
Remarks
Required
- Quick Links:
- Ip Routing Basics
Hide quick links:
Table of Contents
Troubleshooting
