Table of Contents
"Getting access to the component" on page 55
Ê
"Removing a riser module" on page 66
Ê
11.2.2 Removing the heat sink
Figure 145: Removing the heat sink
Ê Loosen the four screws of the heat sink in a crossover pattern according to
the numbering.
Ê Carefully turn the heat sink back and forth to detach it from the CPU.
I
This may be necessary due to the adhesive quality of the thermal
paste located between the heat sink and the CPU.
V
CAUTION!
Pay special attention not to damage any system board components
surrounding the CPU socket.
Ê Lift the heat sink out of the chassis.
Ê Remove the residual thermal paste from the underside of the heat sink and
the surface of the CPU.
Ê Clean the underside of the heat sink and the surface of the CPU using a lint-
free cloth.
RX1330 M3
Upgrade and Maintenance Manual
Processor (CPU)
233
Table of Contents
