Verify The Configuration - HP 10500 Series Configuration Manual
Layer 3 - ip services
Hide thumbs
Also See for 10500 Series:
- Security configuration manual (596 pages) ,
- Configuration manual (512 pages) ,
- Specifications (42 pages)
Table of Contents
[SwitchB-Tunnel0] source 2001::2:1
# Configure the destination address of the tunnel interface Tunnel0 to be the IP address of interface
VLAN-interface 101 on Switch A.
[SwitchB-Tunnel0] destination 2002::1:1
# Apply service loopback group 1 to the tunnel in tunnel interface view.
[SwitchB-Tunnel0] service-loopback-group 1
[SwitchB-Tunnel0] quit
# Configure a static route from Switch B through the tunnel interface Tunnel0 to Group 1.
[SwitchB] ip route-static 10.1.1.0 255.255.255.0 tunnel 0
Verify the configuration:
3.
# Display the tunnel interface status on Switch A and Switch B.
[SwitchA] display interface Tunnel 0
Tunnel0 current state: UP
Line protocol current state: UP
Description: Tunnel0 Interface
The Maximum Transmit Unit is 1456
Internet Address is 10.1.2.1/24 Primary
Encapsulation is TUNNEL, service-loopback-group ID is 1.
Tunnel source 2002::1:1, destination 2001::2:1
Tunnel bandwidth 64 (kbps)
Tunnel protocol/transport GRE/IPv6
GRE key disabled
Checksumming of GRE packets disabled
Last clearing of counters:
Last 300 seconds input:
Last 300 seconds output:
10 packets input,
0 input error
10 packets output,
0 output error
[SwitchB] display interface Tunnel 0
Tunnel0 current state: UP
Line protocol current state: UP
Description: Tunnel0 Interface
The Maximum Transmit Unit is 1456
Internet Address is 10.1.2.2/24 Primary
Encapsulation is TUNNEL, service-loopback-group ID is 1.
Tunnel source 2001::2:1, destination 2002::1:1
Tunnel bandwidth 64 (kbps)
Tunnel protocol/transport GRE/IPv6
GRE key disabled
Checksumming of GRE packets disabled
Last clearing of counters:
Last 300 seconds input:
Last 300 seconds output:
10 packets input,
0 input error
10 packets output,
Never
0 bytes/sec, 0 packets/sec
0 bytes/sec, 0 packets/sec
840 bytes
840 bytes
Never
0 bytes/sec, 0 packets/sec
0 bytes/sec, 0 packets/sec
840 bytes
840 bytes
200
Table of Contents
Troubleshooting
