Displaying And Maintaining The Dhcpv6 Relay Agent; Dhcpv6 Relay Agent Configuration Example; Network Requirements - HP 10500 Series Configuration Manual
Layer 3 - ip services
Hide thumbs
Also See for 10500 Series:
- Security configuration manual (596 pages) ,
- Configuration manual (512 pages) ,
- Specifications (42 pages)
Table of Contents
Step
2.
Set the DSCP value for
DHCPv6 packets sent by the
DHCPv6 relay agent.
Displaying and maintaining the DHCPv6 relay
agent
Task
Display the DUID of the local
device.
Display DHCPv6 server addresses
specified on the DHCPv6 relay
agent.
Display packet statistics on the
DHCPv6 relay agent.
Clear packets statistics on the
DHCPv6 relay agent.
DHCPv6 relay agent configuration example
Network requirements
As shown in
the DHCPv6 server is 2::2/64. The DHCPv6 client and server must communicate through a DHCPv6
relay agent (Switch A).
Switch A acts as the gateway of network 1::/64. It sends RA messages to notify the hosts to obtain IPv6
addresses and other configuration parameters through DHCPv6.
Figure 58 Network diagram
DHCPv6 client
DHCPv6 client
Figure
58, the network address prefix of DHCPv6 clients is 1::/64, and the IPv6 address of
DHCPv6 client
Vlan-int3
1::1/64
Switch A
DHCPv6 relay agent
DHCPv6 client
Command
ipv6 dhcp dscp dscp-value
Command
display ipv6 dhcp duid [ | { begin | exclude |
include } regular-expression ]
display ipv6 dhcp relay server-address { all |
interface interface-type interface-number } [ |
{ begin | exclude | include }
regular-expression ]
display ipv6 dhcp relay statistics [ | { begin |
exclude | include } regular-expression ]
reset ipv6 dhcp relay statistics
Vlan-int2
2::1/64
2::2/64
DHCPv6 server
141
Remarks
Optional.
By default, the DSCP value in
DHCPv6 packets is 56.
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in user
view.
Table of Contents
Troubleshooting
