Table of Contents
Reference Manual
00809-XXXX-4811, Rev AA
February 2012
POWER MODULE
INSTALLATION
Figure 3-4. Black Power Module
Installation
Figure 3-5. Possible Antenna
Rotations
PRELIMINARY
NOTE
Wireless devices should be powered up in order of proximity from the Smart
Wireless Gateway, beginning with the closest device to the Smart Wireless
Gateway. This will result in a simpler and faster network installation.
1. Install the Power Module.
NOTE
Use caution when handling the power module, it may be damaged if dropped
from heights in excess of 20 ft (6 m).
2. Close the housing cover and tighten to site or safety specifications.
Always ensure a proper seal by installing the electronics housing covers
so that metal touches metal, but do not over tighten.
3. Position the antenna such that it is vertical, either straight up or straight
down, as shown in Figure 3-5. The antenna should be approximately 3 ft
(1 m) from any large structures or buildings to allow clear communication
to other devices.
TO BE UPDATED
NOTE
Possible antenna rotation shown. Antenna rotation allows for best installation
practices in any configuration.
Rosemount 3308
3-5
Table of Contents
Troubleshooting
