Mitsubishi Electric Q03UDVCPU User Manual page 96
Qnucpu series (communication via built-in ethernet port)
Hide thumbs
Also See for Q03UDVCPU:
- User manual (720 pages) ,
- User manual (580 pages) ,
- User manual (116 pages)
Table of Contents
• For "Open Setting"
Item
Protocol
Open System
TCP Connection
Host Station Port No.
Destination IP Address
Destination Port No.
*1
Do not specify 1388
2)
(b) Devices used in the program
The following table lists the device numbers and applications used in the sample program.
Device number
M3000
D3000 and D3001
M300 and M301
D300 to D303
M3002
M3003
D400 to D403
SD1282
SD1286
D5000 and D5001
M500 and M501
D500 and higher
M5002
M5003
D6000 and D6001
D6010 to D6014
94
TCP
Socket Communication
Unpassive
1000
(Setting range: 0001
H
Blank.
When "Fullpassive" is selected for "TCP Connection", a value must be set. (Setting range:
0.0.0.1 to 223.255.255.254)
Blank.
When "Fullpassive" is selected for "TCP Connection", a value must be set. (Setting range:
0.0.0.1 to 223.255.255.254)
to 1391
(5000 to 5009) because these ports are used by the system. (
H
H
Send direction
SP.SOCSND instruction control data
SP.SOCSND instruction completion device
Send data length and send data (6 bytes of 12
Normal send indication
Send error indication
SP.SOCRMODE instruction control data
Open completion signal
Receive state signal
SP.SOCRCV instruction control data
SP.SOCRCV instruction completion device
Receive data length and receive data
Normal receive indication
Receive error indication
SP.SOCCINF instruction control data
SP.SOCCINF instruction completion device
Setting
to 1387
, 1392
to FFFE
(1 to 4999, 5010 to 65534))
H
H
H
H
Application
H
*1
Page 200, Appendix
, 34
, 56
, 78
, 9A
, and BC
H
H
H
H
)
H
Hide quick links:
Table of Contents
