Touchpad Cable - HP 15-cc000 Maintenance And Service Manual

NOTE:

The TouchPad spare part kit does not include the TouchPad cable. The TouchPad cable is available

using spare part number 926843-001.

Before removing the TouchPad cable, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and

then unplugging the AC adapter from the computer.

4.

Remove the optical drive (see

5.

Remove the bottom cover (see

6.

Remove the battery (see

Remove the TouchPad cable:

1.

Release the ZIF connector (1) to which TouchPad cable is connected, and then disconnect

the TouchPad cable from the system board.

2.

Release the ZIF connector (2) to which TouchPad cable is connected, and then disconnect

the TouchPad cable from the TouchPad.

3.

Remove the TouchPad cable (3).

Reverse this procedure to install the TouchPad cable.

Optical drive on page

Bottom cover on page

Battery on page

38).

35).

36).

Component replacement procedures

47