Removal And Replacement Procedures; Component Replacement Procedures; Optical Drive - HP 15-cc000 Maintenance And Service Manual

5

This chapter provides removal and replacement procedures for Authorized Service Provider only parts.

CAUTION:

Components described in this chapter should only be accessed by an authorized service provider.

Accessing these parts can damage the computer or void the warranty.

CAUTION:

This computer does not have user-replaceable parts. Only HP authorized service providers should

perform the removal and replacement procedures described here. Accessing the internal part could damage

the computer or void the warranty.

NOTE:

Details about your computer, including model, serial number, product key, and length of warranty,

are on the service tag at the bottom of your computer. See

product number, and warranty information on page 14

NOTE:

HP continually improves and changes product parts. For complete and current information on

supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then

follow the on-screen instructions.

There are as many as 57 screws that must be removed, replaced, and/or loosened when servicing Authorized

Service Provider only parts. Make special note of each screw size and location during removal

and replacement.

Description

DVD±RW DL SuperMulti Drive (does not include optical drive bezel or optical drive bracket)

NOTE:

The optical drive spare part kit does not include the optical drive bezel or the optical drive bracket. The optical drive bezel is

available using spare part number 926835-001. The optical drive bracket is available using spare part number 926850-001

Before disassembling the computer, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and

then unplugging the AC adapter from the computer.

Remove the optical drive:

1.

Turn the computer upside down on a flat surface.

2.

Position the computer with the front toward you.

3.

Remove the Mylar screw cover (1).

The screw cover is available in the Rubber Feet Kit, spare part number 926855-001.

Locating the serial number, model number,

for details.

Component replacement procedures

Spare part number

920417-003

35