Wlan Module - HP 15-cc000 Maintenance And Service Manual

Description

Intel Dual Band Wireless-AC 7265 802.11 AC 2×2 WiFi + Bluetooth 4.2 Combo Adapter (non-vPro)

Intel Dual Band Wireless-AC 3168 802.11AC 1×1 WiFi + Bluetooth 4.2 Combo Adapter (non-vPro)

Realtek RTL8723BE-VB 802.11 bgn 1×1 WiFi + Bluetooth 4.0 Combo Adapter

Realtek RTL8723DE 802.11 bgn 1×1 WiFi + Bluetooth 4.2 Combo Adapter

CAUTION:

To prevent an unresponsive system, replace the wireless module only with a wireless module

authorized for use in the computer by the governmental agency that regulates wireless devices in your

country or region. If you replace the module and then receive a warning message, remove the module to

restore device functionality, and then contact technical support.

Before removing the WLAN module, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and

then unplugging the AC adapter from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the optical drive (see

5.

Remove the bottom cover (see

6.

Remove the battery (see

Remove the WLAN module:

1.

Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.

NOTE:

WLAN antenna cable labeled "2/AUX" connects to the WLAN module "Aux" terminal.

2.

Remove the Phillips PM2.0×2.3 screw (2) that secures the WLAN module to the computer. (The WLAN

module tilts up.)

Optical drive on page

Bottom cover on page

Battery on page

The WLAN antenna cable labeled "1/MAIN" connects to the WLAN module "Main" terminal. The

35).

36).

38).

Component replacement procedures

Spare part number

901229-855

863934-855

855106-855

927230-855

41