Accessing The Sd Card; Sd Card Insertion And Removal - Cisco 1120 Hardware Installation

Figure 2

SD LED – SD Flash Memory Module LED States

Label

Description

SD0

SD flash card status

The SD card is accessed from the router exterior, though the router SD card port, shown in

Caution:

Removing the SD card during normal router operation will cause the router to stop operating. Do not remove

the SD card while the router is operating.

Figure 3

SD Card Slot (with Cover) on Router Exterior

Depending on the configuration, the router could arrive in the shipping container with the SD card already installed.

However, you might need to install or remove an SD card in the router when:



You are upgrading the router with software or firmware stored on the SD card.



The router requires an SD card with greater memory capacity.

Color and State

Description

Green solid

SD flash card is installed and operating normally.

Note:

remains green solid until the router is rebooted.

Green blinking

A data transfer between the router and the SD card is in progress.



Amber solid



Amber blinking

An unsupported SD card is installed in the slot.

If the SD Card is removed, the SD flash memory module LED

An error occurred when the router accessed the SD flash card.

The router could not find a system software image.

SD card slot

81

Figure 3 on page

81.