Table of Contents
Program the BW100 as follows:
Often only one point of compensation is required, usually at a low load value. In the prior
example, if compensation was only required at 11.6 kg/m, the programming could be as
follows. Compensation is optimized by establishing the next load value that agrees with
the material test, hence where compensation is zero and entering it as the next
compensation point.
20
actual weight per material test
totalized weight by BW100
belt scale response
linearized BW100 response
% compensation
15
span (100%)
10
5
0
7ML19985DJ01
Milltronics BW100 - INSTRUCTION MANUAL
P390 = 1
P391 = 11.6
P392 = -14.3
P393 = 23.2
P394 = 10.5
P395 = 34.7
P396 = -8
P390 = 1
P391 = 11.6
P392 = -14.3
P393 = 23.2
P394 = 0
P395 = 34.7
P396 = 0
3
-14.0
10
20
load - kg / m
30
40
50
Page 41
- Quick Links:
- Speed Sensor
- Zero Calibration
Hide quick links:
Table of Contents
